Suitable Surfaces
-
Coprox Masonry Waterproofing
- Coprox Waterproof Dualcoat
- Virgin pavers
- Virgin clay tiles
If in any doubt as to surface suitability, do a test area first.
Weather Conditions
Do not apply to exterior surfaces if rain is imminent, during high winds or freezing temperatures.
Surface Preparation
-
Surfaces must be completely dry.
- Coprox Masonry Waterproofing and Coprox Waterproof Dualcoat applications must be allowed to dry for at least 48 hours before application commences. Drying times may be longer in cold or wet weather.
All surfaces must be free of dust, dirt and all other foreign matter.
First Coat
- Stir the sealer thoroughly.
- Apply the sealer as a thin film using a clean dry mohair roller, sheepskin applicator or suitable brush.
Second Coat
- The second coat can be applied in the same manner as above as soon as the first coat is touch dry (approximately 1 hour) or later.
- Allow the sealer to dry for at least 48 hours before use. Drying times may be longer in cold or wet weather.
Coverage
10 m2 per litre per coat (approx.) |